Dash Upgrade Completed
#22
JB Marshall
Gold Member
Thread Starter
Join Date: Mar 2006
Location: Hudson Valley, NY
Posts: 940
Likes: 0
Received 0 Likes
on
0 Posts
t500 thw scary part was waiting 7 months before being able to put it all back together. I was starting to have nightmares of not being able to remember or follow my notes from back in early November.
#24
21 and 42 footers
Platinum Member
Here's a pic of the old. Note I had removed the compass and made a star-board plate to hold the GPS. I incorporated the GPS into the new dash.
#25
Registered
Join Date: Dec 2000
Location: Bell Canyon, CA
Posts: 12,754
Likes: 0
Received 0 Likes
on
0 Posts
At least you put everything back where it came from. I moved every single one of my guages to new locations (even a new pattern from the old). My guages were set with port/starboard beside each other related to oil/temp/etc. Now it's patterned port motor on port side, starboard motor on starboard side.
Here's a pic of the old. Note I had removed the compass and made a star-board plate to hold the GPS. I incorporated the GPS into the new dash.
Here's a pic of the old. Note I had removed the compass and made a star-board plate to hold the GPS. I incorporated the GPS into the new dash.
#26
JB Marshall
Gold Member
Thread Starter
Join Date: Mar 2006
Location: Hudson Valley, NY
Posts: 940
Likes: 0
Received 0 Likes
on
0 Posts
I just got back from my test run and I'm very happty to report that everything works as should.... now it's time to celebrate the results I am heading for the beer
#27
Registered
Join Date: Sep 2011
Location: Singapore
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
GARMIN GPS/Plotter in Fastech 312 dash
I recently purchased a 2002 Fastech 312. I would like to install a Garmin GPS/Plotter in the factory dash directly above the steering wheel.
I am pretty sure that the 400 series Garmins will fit in this location, but does anyone know if the 500 series Garmins will?
Cheers
Ross
I am pretty sure that the 400 series Garmins will fit in this location, but does anyone know if the 500 series Garmins will?
Cheers
Ross