Trim indicator range?
#1
Registered
Thread Starter
Join Date: Aug 2010
Location: Seaford, DE
Posts: 167
Likes: 0
Received 0 Likes
on
0 Posts
Trim indicator range?
I replaced the trim indicator cables on my 382 because the old set was bustd when i bought the bought. I just had a chance to cycle them yesterday.
I have them on 0 when all the way up, but when you run them down they only go to 7.
is that right? I cant really adjust anything on them i dont think.
Normal?
I have them on 0 when all the way up, but when you run them down they only go to 7.
is that right? I cant really adjust anything on them i dont think.
Normal?
#3
Registered
Thread Starter
Join Date: Aug 2010
Location: Seaford, DE
Posts: 167
Likes: 0
Received 0 Likes
on
0 Posts
they are the stock trim indicators. drives on the left tabs on the right 0-10
when the tabs are all the way up they sit at 0
when i run the tabs all the way down it stops at 7
normal?
when the tabs are all the way up they sit at 0
when i run the tabs all the way down it stops at 7
normal?
#7
Where To
VIP Member
Join Date: Nov 2001
Location: Alexandria Bay, NY 1000 Islands
Posts: 2,517
Likes: 0
Received 3 Likes
on
3 Posts
I think mine only go to about 7 on the tabs. I'm pretty sure that's normal. The confusion was we thought you were talking about the drives.
Dave
Dave
__________________
Air, Sea, and Land...Exploring the planet in 3-D!
Air, Sea, and Land...Exploring the planet in 3-D!
#9
Registered
its normal...mine does this on the tabs and drives.