Where to get anodized grab handles for cockpit?
#1
VIP Member
VIP Member
Thread Starter
Join Date: Oct 2003
Location: Round Rock, TX
Posts: 166
Likes: 0
Received 0 Likes
on
0 Posts
Where to get anodized grab handles for cockpit?
Want red anodized grab handles for my cockpit (current handles are stainless). Anyone know if I can get these from somewhere other than Fountain? I looked online and no one appears to stock the same length handles. Any help would be greatly appreciated.
Also, could I just have my existing handles anodized? Not sure if this is possible with stainless.
Thanks in advance for the help.
Brad
Also, could I just have my existing handles anodized? Not sure if this is possible with stainless.
Thanks in advance for the help.
Brad
#2
Registered
Join Date: Apr 2003
Location: Lake George N.Y.
Posts: 1,530
Likes: 0
Received 0 Likes
on
0 Posts
Re: Where to get anodized grab handles for cockpit?
Just take yours off & have them powdercoated in a
candy apple color. I did mine in a candy apple blue
and they came out beautiful. It was only 400 dollers
to do all my interior rails & seat bases.
candy apple color. I did mine in a candy apple blue
and they came out beautiful. It was only 400 dollers
to do all my interior rails & seat bases.
#3
Registered
Join Date: May 2004
Location: Stuart
Posts: 254
Likes: 0
Received 0 Likes
on
0 Posts
Re: Where to get anodized grab handles for cockpit?
Call Martin Sanborn at Fountain, he has full uopgrade packages for all this type of stuff. Fountain are really stepping up to the plate on these things.
#4
VIP Member
VIP Member
Thread Starter
Join Date: Oct 2003
Location: Round Rock, TX
Posts: 166
Likes: 0
Received 0 Likes
on
0 Posts
Re: Where to get anodized grab handles for cockpit?
Thanks epeek and wcmarine for the advice!!
Epeek - I assume the candy gives it more of an "anodized" look vs. a normal powdercoat color?
I'll give Fountain a call to see their price before I go the powdercoating route. Would prefer not to be without the handles during the summer if the price difference isn't too great.
Thanks again.
Epeek - I assume the candy gives it more of an "anodized" look vs. a normal powdercoat color?
I'll give Fountain a call to see their price before I go the powdercoating route. Would prefer not to be without the handles during the summer if the price difference isn't too great.
Thanks again.
#7
Registered
Join Date: Apr 2003
Location: Lake George N.Y.
Posts: 1,530
Likes: 0
Received 0 Likes
on
0 Posts
Re: Where to get anodized grab handles for cockpit?
Originally Posted by 1stfntn
Thanks epeek and wcmarine for the advice!!
Epeek - I assume the candy gives it more of an "anodized" look vs. a normal powdercoat color?
I'll give Fountain a call to see their price before I go the powdercoating route. Would prefer not to be without the handles during the summer if the price difference isn't too great.
Thanks again.
Epeek - I assume the candy gives it more of an "anodized" look vs. a normal powdercoat color?
I'll give Fountain a call to see their price before I go the powdercoating route. Would prefer not to be without the handles during the summer if the price difference isn't too great.
Thanks again.
and the color coat is transparent. Makes for a great
look.
Heres a pic of the gut on my 91' 32 fever. I had
just done it over at the time. Shes gone now,just
bought a new 35 EX last week.
#8
Registered
Join Date: Apr 2003
Location: Lake George N.Y.
Posts: 1,530
Likes: 0
Received 0 Likes
on
0 Posts
Re: Where to get anodized grab handles for cockpit?
Originally Posted by kickin32
epeek where did you get yours done at thanks
dept about 5 years ago. They do great job. I can
get you their adress & phone # if you want.