Fountain speedo - hole size
#1
Platinum Member
Platinum Member
Thread Starter
Join Date: Sep 2002
Location: Lake St. Clair
Posts: 1,935
Likes: 0
Received 0 Likes
on
0 Posts
Fountain speedo - hole size
what the standard hole size fountain uses for the speedo? thinking on going with a GPS unit - this one looks like a good deal, not sure if it fits in the standard hole.
http://cgi.ebay.com/ebaymotors/AutoM...spagenameZWD1V
http://cgi.ebay.com/ebaymotors/AutoM...spagenameZWD1V
#4
Re: Fountain speedo - hole size
Isn't there a bezel that adapts the smaller GPS units to fit in the larger holes? Seems to me I have heard that. I imagine it is the same as the speedo bezel, but has a lstep that will fit in the dash hole to center it, then have a smaller hole for the new gauge.
If nothing else, the bezel for the 3 3/8" gauges will still work on the larger holes because it will cover the hole. You will need to either wrap the new gauge in tape to take up the slack or make a sleeve. Either way, it will look just like the tachs when done.
If nothing else, the bezel for the 3 3/8" gauges will still work on the larger holes because it will cover the hole. You will need to either wrap the new gauge in tape to take up the slack or make a sleeve. Either way, it will look just like the tachs when done.
Thread
Thread Starter
Forum
Replies
Last Post
FunHome
General Boating Discussion
11
05-17-2002 01:49 PM