Sea strainer-27 fever
01-10-2008, 10:27 AM
#1
Registered
Thread Starter
Sea strainer-27 fever
I want to add a sea strainer to a 03 27 fountain w a 496...what brand/type/style will fit best. Does any one have any reccomendations for a clean single engine setup. Pictures would be great. I would assume it would be a stringer mount.
01-10-2008, 11:22 AM
#2
Registered User
Platinum MemberJoin Date: Oct 2006
Location: West Hills, CA & Lake Havasu
Posts: 557
Likes: 0
Received 0 Likes
on
0 Posts
I just installed sea strainers on my Fountain and after doing considerable research I decided on the CP Marine strainer.
http://www.cpperformance.com/detail.aspx?ID=996
It has a single knob to open it up, you don't need any tools, and it does not have any wing nuts to loose. It cost about $480.00, and mounts on the stringer. You can look through the lexan top and see that the water is circulating to the engine, so you would know if you weren't getting water just by looking.
http://www.cpperformance.com/detail.aspx?ID=996
It has a single knob to open it up, you don't need any tools, and it does not have any wing nuts to loose. It cost about $480.00, and mounts on the stringer. You can look through the lexan top and see that the water is circulating to the engine, so you would know if you weren't getting water just by looking.
