Anyone know this 47'
#1
Gold Member
Gold Member
Thread Starter
Join Date: Feb 2004
Location: Las Vegas Nevada
Posts: 337
Likes: 0
Received 0 Likes
on
0 Posts
Anyone know this 47'
Came across this 47'. Needs tons of work. Needs complete interior from back to front plus many other things. Anyone know the story?
#9
Commercial Member
Commercial Member
I just talked to the owner. The boat does have rebuilt HP 500's and drives. He said it should run, just doesn't have interior or cabin cushions.
#10
Gold Member
Gold Member
Thread Starter
Join Date: Feb 2004
Location: Las Vegas Nevada
Posts: 337
Likes: 0
Received 0 Likes
on
0 Posts
I called Fountain to get some exact #s on refitting interior.
Needs complete bolsters, rear bottom/back seat, pads for engine hatch, side panels in cockpit and doors in gunwale storage. Tax and shipping approx:$18,000.00
The cuddy is completely stripped. If put back to factory interior with full galley/bath/seats and bed approx. $10,000
This really is not to bad by the time you get it all done.
But I was leiry about the power. Claims the motors are brand new. The pictures of the engines looked to me like they where rebuilds although I am no expert. He says he has not heard them run. The boat has been sitting since 2004. I am sure seals/impellers/etc are dried out and need to be replaced.
Don't know anything about the drives.
I would like to know if anyone has looked at the boat or is in the area of Lake Texoma that can go look it.
Needs complete bolsters, rear bottom/back seat, pads for engine hatch, side panels in cockpit and doors in gunwale storage. Tax and shipping approx:$18,000.00
The cuddy is completely stripped. If put back to factory interior with full galley/bath/seats and bed approx. $10,000
This really is not to bad by the time you get it all done.
But I was leiry about the power. Claims the motors are brand new. The pictures of the engines looked to me like they where rebuilds although I am no expert. He says he has not heard them run. The boat has been sitting since 2004. I am sure seals/impellers/etc are dried out and need to be replaced.
Don't know anything about the drives.
I would like to know if anyone has looked at the boat or is in the area of Lake Texoma that can go look it.