New Props Just Arrived
#3
Registered
Talked to Brett yesterday about some Herings for mine. If I could turn a pair just like those to 5300 I'd be a real happy camper . I do think he is the guy to deal with if you're looking for some.
Things are jewel like aren't they!
Things are jewel like aren't they!
Last edited by RaggedEdge; 03-12-2009 at 06:10 PM.
#7
Registered
VIP Member
Thread Starter
Join Date: Feb 2005
Location: Gallatin, TN
Posts: 937
Likes: 0
Received 0 Likes
on
0 Posts
I want to say thanks to Eric and the crew! SignZoo did a wonderful job. I am going to start another thread but the detail and the job those guys did is wonderful.
#8
Registered
VIP Member
Thread Starter
Join Date: Feb 2005
Location: Gallatin, TN
Posts: 937
Likes: 0
Received 0 Likes
on
0 Posts
No, the props on the boat are 17X35 4 bl mercs but the slip was almost 20% and I could easily turn them to the limiter at 6150. The previous owner tried 17X35 5bl pre-cnc mercs last year and like them. He ran them up to the limiter too so if I can turn these anything over 6000 I will be one happy camper! Especially if I can get the slip down where it should be.