Billet Fountain Vents
#1
Registered
Thread Starter
Join Date: Jan 2001
Location: Topeka, KS USA
Posts: 371
Likes: 0
Received 0 Likes
on
0 Posts
Billet Fountain Vents
I may be breaking the rules, but I have 6 billet vents in white from Dana with the Fountain logo etched in the center that look like a million bucks but will not work on my '98 Fever because of the painted stripe on my hull. If you have a solid boat above the rub rail or a narrow stripe, these babies look the business. Would like to send off to a good OSO home. I paid about $400 for them all told (and waited for months to get them . . ). They are as new. $300? Anyone? Buehler, Buehler . . . .
#5
Registered
Thread Starter
Join Date: Jan 2001
Location: Topeka, KS USA
Posts: 371
Likes: 0
Received 0 Likes
on
0 Posts
Matt- the dimensions are: 17 5/8" long, 2 1/2" tall, and they are machined from 1/2" 6061-T6 billet aluminum. The "standard" plastic vents on your boat are probably 2 3/4 " tall Attwoods (which is what I went back to because of the stripe on my boat- but for the stripe, they would be on my boat now!!!!
#8
Registered
Join Date: Jun 2006
Location: Sunland, CA
Posts: 377
Likes: 0
Received 0 Likes
on
0 Posts
Matt- the dimensions are: 17 5/8" long, 2 1/2" tall, and they are machined from 1/2" 6061-T6 billet aluminum. The "standard" plastic vents on your boat are probably 2 3/4 " tall Attwoods (which is what I went back to because of the stripe on my boat- but for the stripe, they would be on my boat now!!!!