WANTED..... Bolster Seats + Interior
#1
Registered
Thread Starter
Join Date: Nov 2009
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
WANTED..... Bolster Seats + Interior
Wanted....Bolster seats + cockpit interior
I have a 1989 fountain 36' Fever which I have picked up and am trying to make sea worthy.The bolster seats and cockpit area are totally shot and needs new upholstery and seating.If you have seats /parts please contact me with what you have.Also looking for 26 or 28 " props ( 4 blade)
Thankyou........Tony
I have a 1989 fountain 36' Fever which I have picked up and am trying to make sea worthy.The bolster seats and cockpit area are totally shot and needs new upholstery and seating.If you have seats /parts please contact me with what you have.Also looking for 26 or 28 " props ( 4 blade)
Thankyou........Tony
#2
Registered
I have bought a bunch of complete interiors from Fountain in years past. They used to have take outs that they didn't throw away that where in great shape. I don't know if you'll be able to get them from them anymore but it might be worth a try.
#3
Registered
Thread Starter
Join Date: Nov 2009
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Fountain interrior
Thanks so much for taking the time to reply.
I will contact them and see what happens .My fear is that it might cost a lot of money which might not be worth putting into the boat as it is an 1989 boat.I will call ...you never know...if that fails I'll just keep looking.
I will contact them and see what happens .My fear is that it might cost a lot of money which might not be worth putting into the boat as it is an 1989 boat.I will call ...you never know...if that fails I'll just keep looking.
#4
Registered
No problem. I personally like older Fountains, they don't run as fast but they take big water. Here's a link to my re-hab on my old 8.8. We still own it and I put more hours in it than any other boat except for the Superhawk. The newer interior fits pretty well but it needs some massaging.
Re-Rig
Re-Rig
#5
I might have some parts that you could use. I bought a set of seats a few years ago to install in my 89 and never installed them. The bad wood was replaced and the covers have been removed as I was going to have them recovered. They include the bases and pumps for the drop downs.
#8
Registered
Join Date: Sep 2007
Location: Masontown, PA
Posts: 81
Likes: 0
Received 0 Likes
on
0 Posts
I can build new seats for you. Check out our website to see some of the work. Also working on new bolsters, so if your interested in a set you can help me decide which design to go with. Give me a call. 724-797-1921 www.custommarinefabrication.com