Triple switch on throttle lever
03-01-2010, 11:10 AM
#11
Charter Member
The wires are really small, so I don't see that being an issue since this is what you want. Wire it up. 
I made my 2 switches to run the drives and tabs without any independent control mainly just for ease of taking off and trimming. Rarely do I ever trim the tabs differently, so I didn't need a 3rd switch.
Easier to hit both swithes to lower both the tabs and drives on the lever than on the dash.
I made my 2 switches to run the drives and tabs without any independent control mainly just for ease of taking off and trimming. Rarely do I ever trim the tabs differently, so I didn't need a 3rd switch.
Easier to hit both swithes to lower both the tabs and drives on the lever than on the dash.
__________________
Some people are like Slinkies - Not really good for anything, but they
bring a smile to your face when pushed down the stairs.
Some people are like Slinkies - Not really good for anything, but they
bring a smile to your face when pushed down the stairs.
