Just Purchased 32 Fever
#11
Registered
#12
Platinum Member
Platinum Member
Not possible separate pumps and move at different rates.. and due to windage/boat load all 4 need to moved independently.
#15
Registered
Join Date: May 2006
Location: Jackson, Mississippi
Posts: 448
Likes: 0
Received 0 Likes
on
0 Posts
#17
Registered
Join Date: May 2006
Location: Jackson, Mississippi
Posts: 448
Likes: 0
Received 0 Likes
on
0 Posts
$55! Which I didn't think was enough. Graphic artist scanned the fountain text off of something as well as the lightening bolts and then combined the two to come up with the new logo you see on newer models. I couldn't find the new logo.
#20
Registered
Join Date: Jan 2007
Location: Higganum, CT
Posts: 342
Likes: 0
Received 0 Likes
on
0 Posts
Also be careful of the etching...I redid mine 3 years ago and bought the panel with all the words etched in. It started to bubble up around a few of the letters and now it's spread all over the panel. I'm pretty good about keeping salt away from it, but it's going to need to be redone again just because of that. I think the etching breaks the seal in the coating and allows moisture to get in there. It's like cancer!