Factory
#1
Registered
Thread Starter
Join Date: Jan 2008
Location: Jacksonville, FL
Posts: 361
Likes: 0
Received 0 Likes
on
0 Posts
Factory
Picked my boat up last Thur from the factory. After they cut the windshield down. Brian showed me around the factory. I was very supprised at the # of new boats under construction. Fountain had 9 or 10 on the line including 2 42' lighting and a 48' cruiser w/triple 700. Donzi han a couple 35' and some smaller 28', Proline was building at a good pace and the 1st of the new Baja line was comming down the line. They are also building the P-1 boats there #16 was almost completed and they had a small fleet of 38' fountains with a pilot house going to one of the small island countys as there patrol boats. Things look very busy lots of employees (200) Diffently a long was from the 13 in 2009.
#2
Platinum Member
Platinum Member
how did the windshield job turnout?
#6
Registered
Join Date: Dec 2002
Location: Kankakee Illinois
Posts: 3,705
Likes: 0
Received 0 Likes
on
0 Posts
#8
Registered
Join Date: Apr 2010
Location: Lake Texoma, OK
Posts: 417
Likes: 0
Received 0 Likes
on
0 Posts
#10
Registered
Usually that's where they put circular swirls on a polished metal surface. Big with the hot rod builders. A lot of old steel machine tools had this done also.
or
it is something else and I totally missed the boat.
ed
or
it is something else and I totally missed the boat.
ed