Wheres all the cup holders!!!!?
#1
Registered
Thread Starter
Join Date: Dec 2010
Location: Port Deposit Md
Posts: 523
Likes: 0
Received 0 Likes
on
0 Posts
Wheres all the cup holders!!!!?
I have been sitting over here in the "sand box" night after night scanning every web site I can find for just that one fountain. 96 through 04, 29-32 foot with just the right motors, paint scheme, etc. So I gotta ask. "Where the He// are all the cup holders"? I had a wellcraft up until I deployed. I sold it. That boat had more cup holders on one side than all of the fevers. I don't know about the rest of you. But when I tie up for the day or even the night I want a place to put my beer. (Know whatta mean).
#6
Registered
Join Date: Jan 2001
Location: Cincinnati, OH
Posts: 710
Likes: 0
Received 0 Likes
on
0 Posts
Our 1996 27 Fever had 2 - behind the bolsters (or none, don't remember for sure anymore).
Our 2000 29 Fever had 2 - in the cabin, by the sink.
Our 2002 29 Fever had 4 - 2 behind the bolsters and 2 in the cabin, by the sink.
Our 2004 27 Fever had 2 - behind the bolsters
Our 2001 35 Lightning twin step had 7 - 2 behind bolsters, 2 built into the arm rests of the bolsters and 3 in the cabin.
Our 2006 29 Fever had 6 - 2 behind the bolsters, 2 in the arm rests of the front bolsters (late 2005 was the first time they put arm rests for the front bolsters in the Fevers', and not all 2006's had the arm rests) and 2 in the cabin.
Our 292 Formula FasTech had ... 13 !! - and I think I may have missed one or two while dizzy from counting all of them (ran out of fingers and had to start using toes).
Our 2000 29 Fever had 2 - in the cabin, by the sink.
Our 2002 29 Fever had 4 - 2 behind the bolsters and 2 in the cabin, by the sink.
Our 2004 27 Fever had 2 - behind the bolsters
Our 2001 35 Lightning twin step had 7 - 2 behind bolsters, 2 built into the arm rests of the bolsters and 3 in the cabin.
Our 2006 29 Fever had 6 - 2 behind the bolsters, 2 in the arm rests of the front bolsters (late 2005 was the first time they put arm rests for the front bolsters in the Fevers', and not all 2006's had the arm rests) and 2 in the cabin.
Our 292 Formula FasTech had ... 13 !! - and I think I may have missed one or two while dizzy from counting all of them (ran out of fingers and had to start using toes).
Last edited by bob_t; 07-26-2011 at 08:40 PM.
#7
Replaced the small plastic ones behind the boolsters in my 32 for larger powdercoated ones. If I have a drink, it's in a coozie. The factory ones wouldn't hold a coozie. Also have 2 in the cabin by the sink, and then 2 more behind the couch headrest in the corners.
Never really worried about more cupholders in the cockpit. Not enough room for more than 4 people anyways to fit halfway comfortable
Never really worried about more cupholders in the cockpit. Not enough room for more than 4 people anyways to fit halfway comfortable
__________________
Some people are like Slinkies - Not really good for anything, but they
bring a smile to your face when pushed down the stairs.
Some people are like Slinkies - Not really good for anything, but they
bring a smile to your face when pushed down the stairs.
#8
Registered
Gold Member
iTrader: (3)
Join Date: Jan 2011
Location: DeRidder, LA
Posts: 489
Likes: 0
Received 0 Likes
on
0 Posts
On my 97 29 Fever I have one at the drivers helm, One on the passenger seat up front, One each in the back for a total of 4 on top. Down bottom I have 3 along the bulkhead wall and 3 next to the sink.
#9
Registered
Join Date: May 2005
Location: LOTO 19 MM
Posts: 257
Likes: 0
Received 0 Likes
on
0 Posts
My 2004 27 had 2 downstairs and ZERO upstairs I found some really nice stainless flip downs somewhere and mounted 2 of them
The sandbox sucks hang in there been there more times than I can count boat research keeps us going over there for sure
The sandbox sucks hang in there been there more times than I can count boat research keeps us going over there for sure
#10
Registered
Gold Member
iTrader: (3)
Join Date: Jan 2011
Location: DeRidder, LA
Posts: 489
Likes: 0
Received 0 Likes
on
0 Posts
Pics of mine in the cockpit. They are built into the bolsters. They are very small in diameter and can hold a 12 oz. can with a koozie but that is about it. I could make them larger but I will wait to do that later when I redo the topside vinyl.