trim motor help?
08-03-2011, 05:18 PM
#11
Registered
VIP Member
Wow, That makes we wonder if the solenoids are really pulling in, All they are is a relay and when it pulls in it is just like jumping across the terminals.
08-03-2011, 06:43 PM
#13
Registered
Start checking your connections at each point.
If you have a volt meter put one end on ground then probe each place, see what the voltage does when the wife hits the trim switch.
You will find it. On my 32 I had a bad connection on the wires under the rear seat where the breakers are.
If you have a volt meter put one end on ground then probe each place, see what the voltage does when the wife hits the trim switch.
You will find it. On my 32 I had a bad connection on the wires under the rear seat where the breakers are.
