35 Executioner Cabin door
#4
At least he isn't listing it on eBay and happens to be naked.
Have you tried calling the factory? Might still be able to make one
__________________
Some people are like Slinkies - Not really good for anything, but they
bring a smile to your face when pushed down the stairs.
Some people are like Slinkies - Not really good for anything, but they
bring a smile to your face when pushed down the stairs.
#5
Registered
Join Date: Apr 2010
Posts: 81
Likes: 0
Received 0 Likes
on
0 Posts
I Second the find a Local guy to make them, I paid four hundred for wind deflectors from Gail at fountain and this is what I got, one was bent more than the other one and one was longer that the other one.
#6
Registered
Join Date: May 2011
Location: Dallas, TX
Posts: 226
Likes: 0
Received 0 Likes
on
0 Posts
I broke my doors and called Tony Vick at Fountain and placed an order for new doors. I only needed 1 which was $250 and both together were in a set for $300 so I got that to have a backup. All the holes matched up perfectly. came with hinges already attached. But like most have said, can prob get made cheaper locally.
#7
Gotta be careful when replace just 1 section that you get the exact same material. They may look the same, but could more translucent than the original one. I had one of my cabin doors replaced with one purchased thru Fountain and it is a little different tint than original. If I'd know, I'd replaced the other one too.
But as FF mentioned, it was a bolt in swap.
But as FF mentioned, it was a bolt in swap.
__________________
Some people are like Slinkies - Not really good for anything, but they
bring a smile to your face when pushed down the stairs.
Some people are like Slinkies - Not really good for anything, but they
bring a smile to your face when pushed down the stairs.
#8
Gold Member
Gold Member
then less than an hour later another nice lady called me to make sure I was helped , great service.
#9
Registered
Join Date: Feb 2006
Location: NORTHERN ILLINOIS
Posts: 1,008
Likes: 0
Received 0 Likes
on
0 Posts
A buddy was kind enough to step on my Bomar deck hatch years ago and Bomar wanted over $500 to fix. I had it replaced by my guy at LOTO for $125 just like new. I had same quote from my local glass company with the Lexan material as well.
#10
Platinum Member
Platinum Member
Door
Glen, give me a call at central welding in north bay on Tuesday, my bud can make you a set here, I'll put you in touch with him.
Erik
Erik