Go Back  Offshoreonly.com > Owners Forum > Fountain
Cabin Seating >

Cabin Seating

Notices

Cabin Seating

Thread Tools
 
Old 12-18-2014, 11:50 AM
  #1  
Registered
Thread Starter
 
Join Date: May 2013
Posts: 20
Likes: 0
Received 0 Likes on 0 Posts
Default Cabin Seating

Hello: 1998 32' fountain twin 502s , I know this has been ask a few times on here. Looking for the screws that hold the cabin seating to the inside deck? They are in the seams? I have looked an found nothing, I feel that something is holding them down, but no heads are in the seams. Has anyone found anything else holding them down? Thank you John
opelgt327 is offline  
Old 12-19-2014, 11:10 AM
  #2  
Registered
 
Join Date: Mar 2008
Location: Kissimmee, Florida
Posts: 315
Likes: 0
Received 1 Like on 1 Post
Default

There are screws in the seems, keep looking. Sometimes the gap the screw goes through is only a 1/4" wide (same as screw head) and it folds back up as if it was sewn. I would drag a small Phillips screwdriver along the seem between the foam areas and you will feel the screw head, then dig down and unscrew. That is how my Fountain is done and how my three formulas were also.
38fountainecman is offline  
Old 12-19-2014, 01:30 PM
  #3  
Registered
Thread Starter
 
Join Date: May 2013
Posts: 20
Likes: 0
Received 0 Likes on 0 Posts
Default

Thank you will keep looking, Marry Christmas to all John
opelgt327 is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.