42 Poker Run rerig
#401
Platinum Member
Platinum Member
Thread Starter
Fabbing new water pickup.
#404
Platinum Member
Platinum Member
Thread Starter
New pickup done.
The following users liked this post:
dykstra (04-29-2020)
#406
Registered
Looks awful deep , in my 42 a few years ago I cut a 1 inch or so relief down the keel about a foot or so long which fed a 1.5 pickup same as this to a single monster separator which fed both engines , worked great with very minimal drag .
#407
Platinum Member
Platinum Member
Thread Starter
This is same type. Last year we had to lower it 3/8 of an inch. Couldn't get enough flow. I'm running dual impeller water pumps on both engines and with the CMI big tube exhaust that has the 1 inch water dumps.it needed that much more. We just made a new pickup because the old one was hacked together from lowering it last fall.
#409
Registered
Question - On the Cats, Skater in particular is ramping the water pickups - Any fountains have this as that looks like its deep to be extremely functional but scrub mph at the same token?