Fountain for Super Vee Light class
#11
Registered
Re: Fountain for Super Vee Light class
Originally Posted by DPT MOTORSPORTS
Brian,
Doesn't a 35' equal out to be a 32 with the platform removed?????
Doesn't a 35' equal out to be a 32 with the platform removed?????
#12
LOOK AT THE LEAD NOW!!!!!
Platinum Member
Re: Fountain for Super Vee Light class
Fun Home,
The boat in the picture is actually a twin engine 35'. Basically the popular F2 version(ie.Utz, Lake Cumberland/Rusty Wallace) with a canopy.
The boat in the picture is actually a twin engine 35'. Basically the popular F2 version(ie.Utz, Lake Cumberland/Rusty Wallace) with a canopy.
#13
Registered
Thread Starter
Re: Fountain for Super Vee Light class
Yeah, I don't know of ANY 35's set up with single engine, and there are hundreds of them out there. That's why this request to the homologation folks as well as Fountain is quite out of the ordinary.
Doesn't mean that it couldn't work, tho.
Brian
Doesn't mean that it couldn't work, tho.
Brian
Last edited by p4-33; 02-03-2005 at 08:54 PM.
#15
Registered
Thread Starter
Re: Fountain for Super Vee Light class
Hey Shane,
Thanks for the reply, but I'm not sure I understand your answer to the question. Let's suppose the 35 hull, with no swim platform measures at 32'11" (although I've not been able to get this confirmed, yet). "No tolerance" to me sounds like it would be over the 32' limit, and NOT be legal for SVL.
What does "no tolerance" mean?
Brian
Thanks for the reply, but I'm not sure I understand your answer to the question. Let's suppose the 35 hull, with no swim platform measures at 32'11" (although I've not been able to get this confirmed, yet). "No tolerance" to me sounds like it would be over the 32' limit, and NOT be legal for SVL.
What does "no tolerance" mean?
Brian
#16
Registered
Thread Starter
Re: Fountain for Super Vee Light class
I was just digging thru the rule books for SBI (2004) and OSS (2004)...
SBI says "Overall lengths shall be rounded off within a six (6") inch tolerance. but no specs for SVL.
OSS doesn't mention tolerances, lists OSSVL as "Length Minimum 26'0", Length Maximum 32'0".
We'll have to see how the 2005 rules shake out.
Brian
SBI says "Overall lengths shall be rounded off within a six (6") inch tolerance. but no specs for SVL.
OSS doesn't mention tolerances, lists OSSVL as "Length Minimum 26'0", Length Maximum 32'0".
We'll have to see how the 2005 rules shake out.
Brian
Last edited by p4-33; 02-08-2005 at 05:50 PM.
#18
Charter Member #94
Charter Member
Re: Fountain for Super Vee Light class
That's what I was wondering. The 32 in single SVL trim seems like it would be the hot setup.
__________________
Abby-someone
Abby-someone
#19
LOOK AT THE LEAD NOW!!!!!
Platinum Member
Re: Fountain for Super Vee Light class
Just really surprised with the way this class has evolved and the time and money spends on racing that they have not come out with one yet. You agree Gordo??? How you been??
#20
Charter Member #94
Charter Member
Re: Fountain for Super Vee Light class
Hiya Dennis! Been, cold.
Agree 100%, but I'm guessing that Reggie is going to focus on the bigger class boats since, from a boat sales aspect, that's where the better proffit margin is. That being said, I know Reggie likes his boats to dominate no matter what class they're in, and I'd think the 32 in SVL trim would scream. Of course, it would have to in order to keep up with the Extreme.
Hope you guys are staying warm up there.
Agree 100%, but I'm guessing that Reggie is going to focus on the bigger class boats since, from a boat sales aspect, that's where the better proffit margin is. That being said, I know Reggie likes his boats to dominate no matter what class they're in, and I'd think the 32 in SVL trim would scream. Of course, it would have to in order to keep up with the Extreme.
Hope you guys are staying warm up there.
__________________
Abby-someone
Abby-someone