First Run with new power
#41
Registered
Re: First Run with new power
Originally Posted by LubeJobs42
Thank you! It's not finished yet. The interior guy is having a hard tme finishng the job. He is doing a very good job of pissing me off! I am glad you and the other OSO members talked me out of going with yellow again. You were right, The purple looks great!!
Beautiful boat, sounded awesome when you guys came into Monty's Saturday.. Sorry, we were having a fishing tournament and blocked the docks... I was going to come over and say hi..
I have been following the boat for awhile, it is on my lunchtime tour pretty regularly.
I am two buildings north of Extreme.. If you have a moment stop by and ask for Scott
#42
Offshoreonly Advertiser
Offshoreonly Advertiser
Re: First Run with new power
Gino, I think I have a pair of 16.5 x 35's at the shop, give me a call Monday.
__________________
Marc
www.mercruiserparts.com
www.go-fast.com
www.bammarine.com
www.cyborgtransmissions.com
It's not alive -www.BoatStuffExpress.com - temporarily retired
Marc
www.mercruiserparts.com
www.go-fast.com
www.bammarine.com
www.cyborgtransmissions.com
It's not alive -www.BoatStuffExpress.com - temporarily retired
#43
Offshoreonly Advertiser
Offshoreonly Advertiser
Re: First Run with new power
Gino, I do have a pair of 16 3/4 x 35's, they are virgin, just got them back from Merc, have not been wet yet.
__________________
Marc
www.mercruiserparts.com
www.go-fast.com
www.bammarine.com
www.cyborgtransmissions.com
It's not alive -www.BoatStuffExpress.com - temporarily retired
Marc
www.mercruiserparts.com
www.go-fast.com
www.bammarine.com
www.cyborgtransmissions.com
It's not alive -www.BoatStuffExpress.com - temporarily retired
#44
Registered
Join Date: May 2004
Posts: 62
Likes: 0
Received 0 Likes
on
0 Posts
Re: First Run with new power
Originally Posted by LubeJobs42
They dynoed at 1,066 HP with 1,030 torque at 6 lbs boost. They lowered the boost a little bit. The motors sound incredible. When they start the sound different from other big motors, I can't explain it, they sound very crisp and very very loud. We have a lot of dialing in to do. We have to do a lot of different prop testing, install the tabs and I need to order a big tunnel tab from Fred. I was hoping to see mid 140's from the looks of it, that is not going to be a problem at all. We may have to raise our target speed, this one is going to be too easy! I will take some pictures tomorrow and post them tomorrow night. Anyone know how to change the knots to MPH on a Navman 5600??
Gary G
Thread
Thread Starter
Forum
Replies
Last Post
cigarette28ss
General Q & A
26
03-15-2007 08:40 AM