Re: Powder coating machine
I have the oven which you can buy cheaper at harbor freight. The oven is about 50 degrees off all the time so a second thermo needs to be added. I am having one built to do bike frames which will cost about 2 grand. The cheap guns work okay. There are a couple of pro guns you can get for around $1500.00 for small runs. There are classes you can take in Ala. that run 3 days to teach a novice how to powder coat.
|
Re: Powder coating machine
Originally Posted by SLINGSHOT
have something as close to chrome as possible in powder...not to familiar with permastar... i think you will be happy
|
Re: Powder coating machine
Slingshoot since it sounds like you have a large shop they may sell it to you. Here one of the links I will look to see if I have the other still. I would love to get some of that stuff.
http://www.goodrichtechnology.com/ |
Re: Powder coating machine
I have a complete Bink's system (less oven) that we bought for a job that ended up going to wet spray. Spray to waste booth,powder gun, 3 stage washer, and sand/shot blast cabinet. Will sell right.
|
Re: Powder coating machine
Originally Posted by KCHOTBOAT
Slingshoot since it sounds like you have a large shop they may sell it to you. Here one of the links I will look to see if I have the other still. I would love to get some of that stuff.
http://www.goodrichtechnology.com/ Go for it Slingshot. The finish is better looking than chrome, we just need a quality operation doing it. :D |
Re: Powder coating machine
Originally Posted by jrz
I have a complete Bink's system (less oven) that we bought for a job that ended up going to wet spray. Spray to waste booth,powder gun, 3 stage washer, and sand/shot blast cabinet. Will sell right.
[email protected] |
Re: Powder coating machine
KCHOTBOAT;
For the Permastar, would a shop just have to buy material or would different equipment also be needed? |
Re: Powder coating machine
Originally Posted by 2112
KCHOTBOAT;
For the Permastar, would a shop just have to buy material or would different equipment also be needed? |
Re: Powder coating machine
TTT
Anyone here interested in bringing Permastar to the Marine World? All the links with goodrich are OEM sites. I used one of them with mixed results. We need a "quality first" operation. |
Re: Powder coating machine
Originally Posted by jrz
I have a complete Bink's system (less oven) that we bought for a job that ended up going to wet spray. Spray to waste booth,powder gun, 3 stage washer, and sand/shot blast cabinet. Will sell right.
I am interested also [email protected] |
All times are GMT -5. The time now is 12:44 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.