Source for Stainless Mesh
#1
Registered
Thread Starter
Join Date: Nov 2000
Location: San Francisco, Ca.
Posts: 357
Likes: 0
Received 0 Likes
on
0 Posts
Source for Stainless Mesh
I need to get this material or something similar for a hatch that I have had made.
Any leads appreciated.
The width is approximately 36"
Here is a photo of the hatch.
Any leads appreciated.
The width is approximately 36"
Here is a photo of the hatch.
Last edited by magnuman; 04-27-2005 at 06:20 PM.
#2
Guest
Posts: n/a
Re: Source for Stainless Mesh
do a search for expanded metal , not mesh.
most metal supplyers should carry it.
http://www.thomasnet.com/nsearch.htm...ch=1®next=1
http://www.accuratealloys.com/ExpMetals.htm Irwindale, CA
most metal supplyers should carry it.
http://www.thomasnet.com/nsearch.htm...ch=1®next=1
http://www.accuratealloys.com/ExpMetals.htm Irwindale, CA
Last edited by Steve_H; 04-27-2005 at 06:54 PM.
#4
Registered
VIP Member
Join Date: Oct 2003
Location: pa/cape coral fl.
Posts: 173
Likes: 0
Received 0 Likes
on
0 Posts
Re: Source for Stainless Mesh
HEY! i can help you out, i have a sheet metal and steel fabrication bussiness, make a pattern full size using heavy construction paper, like the back of a tablet and send to me. do you need on or two? i`ll make you one like the pic. send to m and m sheet metal and steel fabricators 2104 marydale ave. williamsport pa 17701 attn: don messner and i will take care of it for you!
#5
VIP Member
VIP Member
Join Date: Nov 2002
Location: Great Lakes
Posts: 372
Likes: 0
Received 0 Likes
on
0 Posts
Re: Source for Stainless Mesh
Very nice of you to help out. I need 2 smaller pieces perhaps there is enough left over. I will send you my patterns on Monday. I am in Ohio so you will get them mid week.
Thanks, Ken
Thanks, Ken
__________________
47 Lightning SE
47 Lightning SE
#6
Registered
iTrader: (1)
Re: Source for Stainless Mesh
McNichols has it in stock I just bought a piece for a friend of mine. It was $85.00 for a 2' x 4' piece.
1-800-237-3820
www.mcnichols.com
1-800-237-3820
www.mcnichols.com
#7
Platinum Member
Platinum Member
Thread
Thread Starter
Forum
Replies
Last Post
jdub
General Boating Discussion
2
05-28-2007 06:21 AM