Offshoreonly.com - Attn. Byrdman:1500x1500HP

Page 1 of 6

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)

- - Attn. Byrdman:1500x1500HP (https://www.offshoreonly.com/forums/general-boating-discussion/102636-attn-byrdman-1500x1500hp.html)

JCPERF

05-07-2005 12:16 PM

Attn. Byrdman:1500x1500HP

1 Attachment(s)

700 Cu in Injected.can make 1500HP and 1500 Ft. Lbs. :eek:with your PSI.It can make close to 1400x1400 with this blower

JCPERF

05-07-2005 12:21 PM

Re: Attn. Byrdman:1500x1500HP

2 Attachment(s)

Makes about 1150 on Pump.Notice the 2 starters :eek:

JCPERF

05-07-2005 12:26 PM

Re: Attn. Byrdman:1500x1500HP

1 Attachment(s)

Makes 1350 at 10 lbs.

Stormrider

05-07-2005 12:50 PM

Re: Attn. Byrdman:1500x1500HP

glad you got the pics and resized them.
Nice numbers... you got a dyno sheet?

Titan

05-07-2005 12:55 PM

Re: Attn. Byrdman:1500x1500HP

I saw that beast run on the dyno. That is going to be a bad ass. Even if it is in a Superboat?

outriggers

05-07-2005 01:06 PM

Re: Attn. Byrdman:1500x1500HP

It needs two starters to crank it? Doug

JCPERF

05-07-2005 01:11 PM

Re: Attn. Byrdman:1500x1500HP

Quote:

Originally Posted by outriggers

It needs two starters to crank it? Doug

Helps alot

SLINGSHOT

05-07-2005 01:20 PM

Re: Attn. Byrdman:1500x1500HP

whats the injection run $$$

JCPERF

05-07-2005 01:24 PM

Re: Attn. Byrdman:1500x1500HP

Quote:

Originally Posted by SLINGSHOT

whats the injection run $$$

When you are done,about $12,000 an engine.

SLINGSHOT

05-07-2005 01:33 PM

Re: Attn. Byrdman:1500x1500HP

nice piece.....do you work at richies?

All times are GMT -5. The time now is 08:48 AM.

Page 1 of 6

Last »

Show 40 post(s) from this thread on one page