Re: need 2 pair muffler inserts for 5" tailpipes
 

What kind of response have the 1150s had from the noise cops?

Re: need 2 pair muffler inserts for 5" tailpipes
 

with the baffles in on a 36 it sounds pretty close to legal.... i don't know what length baffles dave is running in get r done (850's), but i probably could find out this weekend...... wiggler has that 36 with 1150's up there and it doesn't sound too bad but i don't know if that one has been tested or not....

Re: need 2 pair muffler inserts for 5" tailpipes
 

you gonna bring the 43 up for the 21st?

Re: need 2 pair muffler inserts for 5" tailpipes
 

I'm 99% sure that's the plan, but he can answer that. :drink:

Re: need 2 pair muffler inserts for 5" tailpipes
 

The pipes are 6" OD but dry. The max OD for a muffler insert is 5 1/4"
And they need to be coaxed in.

Re: need 2 pair muffler inserts for 5" tailpipes
 

I knew you would come through :drink:

Re: need 2 pair muffler inserts for 5" tailpipes
 

Who's your buddy?

Re: need 2 pair muffler inserts for 5" tailpipes
 

GGB wants build the insert to fit the tailpipe rather than put a smaller one in just to clear the dumps.
I am going to try to get him a template off Dlo's 43this weekend.

Re: need 2 pair muffler inserts for 5" tailpipes
 

TS- are all the 6" pipes you (Nor-tech) use like this?

Re: need 2 pair muffler inserts for 5" tailpipes
 

All big motors use dry pipes which will have the "swedges" at the end of the pipe. Smaller motors 850 HP or less will have wet pipes so you can have a 5 3/4" OD insert. Graham at GGB has the specs. The problem with those pipes and making something fit is that they seem to be inconsistent from pipe to pipe.
TS