For all you TRS konrad guy's
 

I make stand off boxes for trs drives the boxes sell for $4000 for the pair. Comes with studs and gaskets, drive line is separate, can modify yours . The boxes are 9 degrees to the transom and 12'' long ,we can can make any type of spacers needed email kidapache2000@yahool .com The twin trbo vet does not come with them.

Re: For all you TRS guy's
 

Where are your pics?

Re: For all you TRS guy's
 

the pics are on

Re: For all you TRS guy's
 

Uh oh... looks like a classified in the GD section!

Re: For all you TRS guy's
 

What is the thickness of the material and what kind of material did you use? Are all the threaded holes helicoiled?

Re: For all you TRS guy's
 

1/2 thick thread inserts with studs that lock in

Re: For all you TRS guy's
 

so , how much height is that going to give , my trs is set up with the propshaft even with the keel (single)

Re: For all you TRS guy's
 

yes they are 12'' the drive line is separate i need your old one to modify yours to make it work the box bolts to the transom

Re: For all you TRS guy's
 

Papache, how to the internals bolt up? Can you still use a plug-in tailstock, or do you need a drive-line with a flange on the output? How does the drive engage? Does the drive yoke engage with a female spline?

I don't see any access panels, so that must mean that all connections are made either inside the transom or from outside the gimbal. Does the box have an internal shaft that is supported with carrier bearings? Please explain.

Now, if we could just get the raised x-dim problem solved without having to jack up the motors, we'd be in biz!

Thanks,
Brian

Re: For all you TRS guy's
 

Looks a little Fly by night to me :p