241 libby project boat
just bought an 89 241 liberator with twin omc 350's.
lots of rotten wood, fiberglass repair is needed, as well as one engine rebuilt.(will do both just cuz) does anyone have this boat and some advice? I could use a bunch of pics because i bought it in pieces!!! |
Re: 241 libby project boat
I don't have one, or any pics, but good luck with it.
|
Re: 241 libby project boat
Good luck, two years, mucho $$, and some heartburn. Joe Murray
|
Re: 241 libby project boat
Any pics? You came to the right place and plenty of good advise will follow......
|
Re: 241 libby project boat
i had a 201 liberator 350/omc for three years. just traded it in this year. it was a 1990. i got sick over the omc thing. do you have cobras or king cobras? i had too much of a hard time finding parts but many people have told me it wasnt hard. i was told that king cobras where one of the strongest drives when built right. good luck to you and if you have ?s in the drive area i will be happy to help you out.
|
Re: 241 libby project boat
yesrej,
they are king cobra with clutch dogs, I've done alot of snooping around online and found some valuable info. Does anyone have info on welding to the transom assembly???, some of the bottom is corroded and bolt holes are showing!!! |
All times are GMT -5. The time now is 04:45 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.