1st MINI CAT got popped, here are some pics for you guys.
#1
Registered
Thread Starter
Join Date: Jun 2004
Location: Phoenix, Havasu, Newport
Posts: 3,062
Likes: 0
Received 0 Likes
on
0 Posts
1st MINI CAT got popped, here are some pics for you guys.
Geeeeeeezzzzz what a process, bought the molds 3 years ago then the economy went in the toilet and it seemed like this project would never see the light of day. Anyhow thanks to Sparky, GlassDave and Pat Wiemer we finally got the first one pulled, this hull is nothing special as we are only using it for templates making and CG certification, it will then be redone and used as a display/demo boat.
I am having 2 different trailer setups done, 1 regular cat single axel and 1 that is 3' longer with a utility box for fuel and vests,toys and misc stuff.
This hull weighs around 240 as it sits, the electric model will be about 45 lbs lighter.
The insert on next post
I am having 2 different trailer setups done, 1 regular cat single axel and 1 that is 3' longer with a utility box for fuel and vests,toys and misc stuff.
This hull weighs around 240 as it sits, the electric model will be about 45 lbs lighter.
The insert on next post
#5
Registered
Thread Starter
Join Date: Jun 2004
Location: Phoenix, Havasu, Newport
Posts: 3,062
Likes: 0
Received 0 Likes
on
0 Posts
This is the insert that supports the driver and passenger.
[IMG]http://i17.photobucket.com/albums/b60/kachinaken/minicat%201st%20pull/238d523d.jpg[/IMG
Hull and Deck placed on top of each other but not actually bonded yet.
I am making these 10's and the 17's to follow under the name Anarchy Powerboats. I've secured my domain and the paperwork for all else is ongoing at present.
For those of you that don't know, OSO's very own BROWNIE made these molds some 20 years ago when he was with Cougar Powerboats, I would say it is a testament to his design and forward thinking that these are still such a good looking boat to this day.
I will post more as we forge ahead, if you have any questions feel free to email me Ken Kirkaldy at [email protected]
[IMG]http://i17.photobucket.com/albums/b60/kachinaken/minicat%201st%20pull/238d523d.jpg[/IMG
Hull and Deck placed on top of each other but not actually bonded yet.
I am making these 10's and the 17's to follow under the name Anarchy Powerboats. I've secured my domain and the paperwork for all else is ongoing at present.
For those of you that don't know, OSO's very own BROWNIE made these molds some 20 years ago when he was with Cougar Powerboats, I would say it is a testament to his design and forward thinking that these are still such a good looking boat to this day.
I will post more as we forge ahead, if you have any questions feel free to email me Ken Kirkaldy at [email protected]
#6
Registered
Thread Starter
Join Date: Jun 2004
Location: Phoenix, Havasu, Newport
Posts: 3,062
Likes: 0
Received 0 Likes
on
0 Posts
#9
VIP Member
VIP Member
awesome Ken, congrats!