|
Re: what bars have dockage in clearwater/st pete
oops the viddyno pull eng # 2
|
Re: what bars have dockage in clearwater/st pete
All you Tampa Bay boaters going to the OPBA Poker Run Labor Day Weekend?
St. Pete / Tampa / Sarasota venue |
Re: what bars have dockage in clearwater/st pete
Originally Posted by ratman
cuda here's the video of the dyno pull of one of my motors 622hp thru quiet mufflers, no breakin so the lifters haven't pumped up and the rings haven't seated. that was the entire run on the dyno for that engine. they should be 670 or so when i get em broken in. the other motor made 660 thru the mufflers and i mean the mufflers on the dyno are very quiet.
Who built the engines? It sounds great. |
Re: what bars have dockage in clearwater/st pete
Undertow is approximately a mile north of the Don. Right on the beach. I can get you the coords if you want them. Everyh girl there looks like she could be a model (and I know a former Maxim girl who has been known to go there).
|
Re: what bars have dockage in clearwater/st pete
Originally Posted by cuda
Bills itself as the world's longest waterfront bar, dunno if it's true. Decent docks, lot's happening, strong tide, food sucks.
Tide can be very strong but they have a dock hand to help you get tied up. Usually good bands and scenery (girls and boats). |
Re: what bars have dockage in clearwater/st pete
I have been to most of the places Johno mentioned. All great suggestions. Some may not be easy getting a boat that size docked.
Philthy Phils for one has limited dock space but, a great place to eat and drink. |
Re: what bars have dockage in clearwater/st pete
1 Attachment(s)
Who built the engines? It sounds great. |
Re: what bars have dockage in clearwater/st pete
1 Attachment(s)
if your in tampa and see this boat flag it down...always some cold ones on hand, ratman
|
Re: what bars have dockage in clearwater/st pete
Originally Posted by ratman
they were origianlly built by expert engine, had a little over 100 hours on them when one motor got wet from a failed exhaust manifold. i bought em from tommy at chief engines (paid 8 k for the pair carb to pan with msd ign.) i freshened them myself rings, bearings, all new ss int and inconel ex valves, crane 139661 hyd rollers morrel lifters. these are going to be spares when mark at mer finishes my 588 blower motors 1000hp a side should make my heavy old school mistress fly. heres a pic of the n/a s in the boat. ratman
|
Re: what bars have dockage in clearwater/st pete
cuda, ive been back in tampa about 4 years, was in ft laud for tan and clearwater for ten before that. i bought my cig off ebay for 22k less power around xmas time. the boat came from seattle wash. the boat was black bottom with white upper with hockey stick stipes, mike price was the owner. it was re gel coated (the guy blocked the hull straight and got rid of the roven woven texture) 2 years ago by the guy i bought it from. last weekend was the first time it was in the gulf.
fevermike, should be at sheppards by 11.00 am give or take a few mins. buzz me on my cell 813-323-4698. |
| All times are GMT -5. The time now is 11:54 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.