trim indicator faceplates
#1
Registered
Thread Starter
Join Date: Oct 2001
Location: Toledo Oh
Posts: 1,915
Likes: 0
Received 0 Likes
on
0 Posts
trim indicator faceplates
Anybody know if you can change the faceplate on Kiekafer trim indicators? Thinking about new dash, and would like to change this as well.
Last edited by Madcow; 02-05-2005 at 10:07 PM.
#2
Registered
Re: trim indicator faceplates
Originally Posted by Madcow
Anybody know if you can change the faceplate on Kiekafer trim indicators? Thinking aboyt new dash, and would like to change this as well.
http://www.trickmarine.net/productde...?productid=225
Last edited by Pantera1; 02-05-2005 at 06:30 PM.
#3
Geronimo36
Gold Member
Re: trim indicator faceplates
Check to see if the merc. unit has the same dimensions. I changed mine from black to white and painted the bezel the color I wanted..
#4
Geronimo36
Gold Member
Re: trim indicator faceplates
Originally Posted by Pantera1
You could change to the rising indicators and save some dash space ..maybe stick a gps otrsomethin in the hole .. FRED ?
http://www.trickmarine.net/productde...?productid=225
http://www.trickmarine.net/productde...?productid=225
#8
Offshoreonly Advertiser
Offshoreonly Advertiser
Re: trim indicator faceplates
The indicators are near the bottom of the page, you can get the lens only and paint your existing bezel.
http://www.mercruiserparts.com/selec..._nbr=41573+94H
http://www.mercruiserparts.com/selec..._nbr=41573+94H
__________________
Marc
www.mercruiserparts.com
www.go-fast.com
www.bammarine.com
www.cyborgtransmissions.com
It's not alive -www.BoatStuffExpress.com - temporarily retired
Marc
www.mercruiserparts.com
www.go-fast.com
www.bammarine.com
www.cyborgtransmissions.com
It's not alive -www.BoatStuffExpress.com - temporarily retired
#9
Guest
Posts: n/a
Re: trim indicator faceplates
The first Indicators were made by Bill Rosenthal at Blue
Water products in Oceanside Calif.
Bill is a old buddy of mine and he makes them for other
people.
[email protected] 760-721-1951
Tell him I said hello.
He has ALL the parts your talking about.
Mike J.
Water products in Oceanside Calif.
Bill is a old buddy of mine and he makes them for other
people.
[email protected] 760-721-1951
Tell him I said hello.
He has ALL the parts your talking about.
Mike J.
#10
Gold Member
Gold Member
Re: trim indicator faceplates
Originally Posted by Too Old
Does anyone have a nice merc indicator with a black card??