ceramic coating
#1
Registered
Thread Starter
Join Date: Apr 2001
Location: Annapolis MD
Posts: 1,464
Likes: 0
Received 0 Likes
on
0 Posts
ceramic coating
Anyone do of know of someone who does high temp ceramic thermal coating near DC area? I need to get the headers/sidepipes for the Corvette coated and would like to be able to drive them instead of figure out how to box them for shipping. I used to use Sermatech when I lived in So Cal, a little far to go now.
-Greg
-Greg
#2
VIP Member
VIP Member
Re: ceramic coating
Maryland Performance Coatings in Eldersburg, ask for Jeff Gosnell 410-549-6122
#3
Registered
Re: ceramic coating
do yourself a favor and don't look for anyone other then Jet Hot you wont regret it they have overnight service if you need it and it's the best coating on the market I use them for all my own and shop projects . Good Luck
#4
Registered
Join Date: Oct 2004
Posts: 498
Likes: 0
Received 0 Likes
on
0 Posts
Re: ceramic coating
Heard Good things about this place. Not local to you but they do a good job. They coat for alot of the header manufacturers
> http://www.hpcoatings.com/
> http://www.hpcoatings.com/
#5
Registered
Join Date: Dec 2002
Location: Kankakee Illinois
Posts: 3,705
Likes: 0
Received 0 Likes
on
0 Posts
Re: ceramic coating
Originally Posted by MESABALANCING
do yourself a favor and don't look for anyone other then Jet Hot you wont regret it they have overnight service if you need it and it's the best coating on the market I use them for all my own and shop projects . Good Luck
Dont` do it Greg! I used Jet Hot for the headers in my jet boat. I ended up sending them back three times and they still were`nt right! They even ruined one of my brand new Bassetts and had to buy me a new one. They never could get them right and refunded my money as well! THEY SUCK!
#6
Registered
Thread Starter
Join Date: Apr 2001
Location: Annapolis MD
Posts: 1,464
Likes: 0
Received 0 Likes
on
0 Posts
Re: ceramic coating
Thanks. If I was going to ship them I'd use Sermatech again, they did several sets for me before. I'll give MD Perf Coatings a call.
-Greg
-Greg