Offshoreonly.com - Speaker Holes

Page 2 of 2

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)

- - Speaker Holes (https://www.offshoreonly.com/forums/general-boating-discussion/115956-speaker-holes.html)

Back4More

11-09-2005 12:35 AM

Re: Speaker Holes

2 Attachment(s)

Always good to finish up with a rounded Bastard file.

DirtyMoney

11-09-2005 12:50 AM

Re: Speaker Holes

If Roto zip bit breaks be sure to have something below you because it will burn carpet, I know first hand.

enticer

11-09-2005 05:53 AM

Re: Speaker Holes

Quote:

Originally Posted by amer3

use a rotozip cut better then jig saw and dose not scratch

Have used rotozip for many holes in the boat..works better than great

Mikey Likes It

11-10-2005 09:22 AM

Re: Speaker Holes

Thanks for all the help. Audiofn I will only being cutting through glass. I think I will try the Rotozip. By the way were in the word can you get a holesaw that big?

ratman

11-10-2005 09:45 AM

Re: Speaker Holes

at the ho saw store

klaw	11-10-2005 01:13 PM

Re: Speaker Holes

don't forget to reglass the exposed edge west system is always good for that

Airpacker

11-10-2005 05:20 PM

Re: Speaker Holes

If you use a jig saw, use the reverse pitch blades. They cut on the down stroke reducing the chances of chipping the gel coat.

All times are GMT -5. The time now is 06:25 PM.

Page 2 of 2

Show 40 post(s) from this thread on one page