Help..Vinyl Graphics...Eraser Wheel..GUN!!
 

Does anyone know where I can get an eraser wheel here in South Florida? I have some vinyl graphics that I'm trying to remove and they are refusing to leave!!!! ARGH! :mad:

I've tried the hair dryer and it laughed...
I even tried some of the "safe" paint remover the West Marine sells and I let it sit for 6 hours!! It laughed again !!
Maybe I should just shoot this crap off......

Ok I feel better now. :D

So they tell me try an "eraser wheel"...does it work and does anyone know where I can get one?

Re: Help..Vinyl Graphics...Eraser Wheel..GUN!!
 

i got one at a autobody paint and supply house.they work

Re: Help..Vinyl Graphics...Eraser Wheel..GUN!!
 

the eraser wheels will not let you down. it amazes me every time i use them. a product that actually does what its supposed to :D

Re: Help..Vinyl Graphics...Eraser Wheel..GUN!!
 

Perhaps one of these guys can help you out???

Graphics Page

Re: Help..Vinyl Graphics...Eraser Wheel..GUN!!
 

Autobody Paint Store

Re: Help..Vinyl Graphics...Eraser Wheel..GUN!!
 

Ok Guys ...tomorrow I WILL find an eraser wheel no matter what ......and beat these EVIL vinyl graphics. :blaster:

Thanks for the input :drink:

Re: Help..Vinyl Graphics...Eraser Wheel..GUN!!
 

Astro is the brand name of an eraser wheel I have used with success. Also, I doubt if the hair dryer provides enough heat to "soften" the graphic for removal - a heat gun is required. I have removed vinyl trim from campers, both aluminum and fiberglass and have found the heat gun to be the most effective for stuborn areas, depending on the type or composition of the graphics. Care is necessary using the heat gun.

Re: Help..Vinyl Graphics...Eraser Wheel..GUN!!
 

3M makes several varieties of wheels for vinyl stripe and graphics removal. Look under abrasive accesories for stripe removal discs. Copy & Paste the link below.


http://solutions.3m.com/wps/portal/!ut/p/kcxml/04_Sj9SPykssy0xPLMnMz0vM0Q9KzYsPDdaP0I8yizeId_Q00C _IcFQEAHkBlY8!

Re: Help..Vinyl Graphics...Eraser Wheel..GUN!!
 

I've talked to a freind who owns a body shop and he says they work great without any damage to painted surfaces.

Re: Help..Vinyl Graphics...Eraser Wheel..GUN!!
 

I used one from 3m it worked great.

Make sure You dont turn it to fast, it will melt the vinyl.

Do what I didnt read the instructions first.