Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)
-   -   625hp in a 29' Fountain? (https://www.offshoreonly.com/forums/general-boating-discussion/118534-625hp-29-fountain.html)

STRAIGHTPRIORITY 12-16-2005 12:00 PM

Re: 625hp in a 29' Fountain?
 
29 fountain= handfull at 88+ you really have to drive the boat! just thought this thread needed a pic!

OLDRAT 12-16-2005 12:47 PM

Re: 625hp in a 29' Fountain?
 
I'm getting about 86 mph on GPS with a 1991 29' with twin
HP465's (502's w/ Bravos) without pushing it. Never have
accurately checked it hung out with just one person on board,
cause I was too busy "drivin' it" :rolleyes:

OR

30Spectre 12-16-2005 01:05 PM

Re: 625hp in a 29' Fountain?
 
friend has a 92 27 w/ 750hp. Runs 90. All over the place. Ive been told the 29 is more effecient than the 27 though???

30Spectre 12-16-2005 01:06 PM

Re: 625hp in a 29' Fountain?
 

Originally Posted by OLDRAT
I'm getting about 86 mph on GPS with a 1991 29' with twin
HP465's (502's w/ Bravos) without pushing it. Never have
accurately checked it hung out with just one person on board,
cause I was too busy "drivin' it" :rolleyes:

OR

damn.. thats fast.. bud has the same setup in a 1997, just touches 80 on good days.

OLDRAT 12-16-2005 01:21 PM

Re: 625hp in a 29' Fountain?
 
Yea, I wasn't expecting it either and initially wrote it off to the mechanical
speedo cause it was bouncing between 85 and 90 for years.

Freshened up the motors due to piston cracking issues several
years ago, but put it back mostly stock since there was no motivation
to improve due to the rough water at Grand and also the low exit of the exhaust
with wet stacks, I could not get too agressive with cam overlap.
The less maintenance on that thing is best, since the bilge is not "fatboy friendly"

Also with the twin big blocks, you always will get "hey, your boat is sinking" comment
cause it is pretty butt heavy.

F1-00 Racing 12-16-2005 02:38 PM

Re: 625hp in a 29' Fountain?
 

Originally Posted by STRAIGHTPRIORITY
01 fever f1 boat... 89-93 with 700.... i dont know if that helps.


01 29 Fever F1 89.6 top speed w/ 500 EFI

I found that approx 81-83 when she was starting to lift out of the water was the tricky part, after that yes you had to be careful but she handled quite nicely. I know people get a rush or a bigger pecker from more horsepower but the boat I mention goes to show that HP isnt everything, its weight, balance, Center of Gravity, bottom blueprinted and 3 years of testing, now it has the kilo records to prove it. Just trying to advise you to think of everything b4 just throwing money away on bigger power. For ex one time, we gained .7 mph by adding a simple 2 $27.00 bags of 25 lbs of buckshot to the bow.
Just my .02

Trent

STRAIGHTPRIORITY 12-16-2005 03:11 PM

Re: 625hp in a 29' Fountain?
 

Originally Posted by F1-00 Racing
01 29 Fever F1 89.6 top speed w/ 500 EFI

I found that approx 81-83 when she was starting to lift out of the water was the tricky part, after that yes you had to be careful but she handled quite nicely. I know people get a rush or a bigger pecker from more horsepower but the boat I mention goes to show that HP isnt everything, its weight, balance, Center of Gravity, bottom blueprinted and 3 years of testing, now it has the kilo records to prove it. Just trying to advise you to think of everything b4 just throwing money away on bigger power. For ex one time, we gained .7 mph by adding a simple 2 $27.00 bags of 25 lbs of buckshot to the bow.
Just my .02

Trent

I do agree! my boat was way off balance... the guy that bought it from me has got some moor speed out of it..... im not sure what has been done but im going to get it back to sell so ill post results and changes!

Cam-shaft 12-16-2005 06:25 PM

Re: 625hp in a 29' Fountain?
 
Just bringing it back to the top. Thank you Cam-shaft.

Dregsz 12-16-2005 06:48 PM

Re: 625hp in a 29' Fountain?
 
Hey Cameron, Why did you thank yourself in the last post?

Are you building the motor or Outsourcing?

If you want to go to the custom look, we do a 572 ci Hydraulic roller for wet exhaust. 725 hp, 750tq.
Dart Big M block, (MarkIV)

masher44 12-17-2005 12:11 PM

Re: 625hp in a 29' Fountain?
 
My 03 29 with a 525efi hit 78 everyday regardless of load and 80+ on a few occasions...


All times are GMT -5. The time now is 06:43 PM.


Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.