brodix heads on a 500efi
thinking about putting on a set... how much hp would i gain?
would i have to reflash the ecu? anyone have prices on brodix heads? :cool: |
Re: brodix heads on a 500efi
I put a set of Brodix Heads on my 2001 500EFI and picked up 400 RPMS. We did not Dyno the motors but had a good base line on RPMS in boat. We did port match the intake to heads bowls were ported ( NOT MUCH ) cleaned up the Intake runners. We did reflash the ECU, very little on fuel and added a few RPMS to the rev limiter depending on what prop I would be using. Also saves a little weight on the tail end.
|
Re: brodix heads on a 500efi
who did your ecu?
man if i picked up that many rpm w/ my props id be flying |
Re: brodix heads on a 500efi
Gotcha covered Bro! :D
|
Re: brodix heads on a 500efi
What size runners?
|
Re: brodix heads on a 500efi
ttt
|
Re: brodix heads on a 500efi
call richie zul, the man. was at his place for a run, an hp 500 with those heads i believe. and some other stuff. made 640 hp @5400, and ran to 5900. he will have your answer.
|
Re: brodix heads on a 500efi
Originally Posted by monstaaa
call richie zul, the man. was at his place for a run, an hp 500 with those heads i believe. and some other stuff. made 640 hp @5400, and ran to 5900. he will have your answer.
|
Re: brodix heads on a 500efi
jc why no info from u?
ive been waiting for u to chime in |
All times are GMT -5. The time now is 06:42 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.