Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)
-   -   Anyone make any heavy duty bilge blower hose? (https://www.offshoreonly.com/forums/general-boating-discussion/120463-anyone-make-any-heavy-duty-bilge-blower-hose.html)

BillR 01-14-2006 08:56 PM

Anyone make any heavy duty bilge blower hose?
 
I am looking for better bilge blower hose.
I replaced a section while one motor was out last winter. Now I have both motors out, and went to replace the other side. However when I inspected the section I did last summer, I found it already had holes in it and the paper thin pastic material is now brittle.
Who makes better / thicker / longer lasting 3" bilge blower hose???

Thanks

offthefront 01-14-2006 09:01 PM

Re: Anyone make any heavy duty bilge blower hose?
 
:drink:

http://www.bakerprecision.com/airduct.htm

Two Ply Fibreglass

Orange Silicone Coated For High Temperature Resistance

Temperature Range
- 75 deg. F to 500 deg. F
(intermittent to + 600 deg. F)

Smoother Bore For Maximum Airflow

Comes boxed in 11 ft. lengths

mwdill 01-14-2006 09:51 PM

Re: Anyone make any heavy duty bilge blower hose?
 
what diameter? 4 inch?

Too Old 01-15-2006 12:11 AM

Re: Anyone make any heavy duty bilge blower hose?
 
I don't know but I need some too. The Maytag dryer hose on my Hustler is falling apart. There has to be something better.

Audiofn 01-15-2006 12:21 AM

Re: Anyone make any heavy duty bilge blower hose?
 
Same with me. I always thought that what they use is such a Joke

RLW 01-15-2006 12:45 AM

Re: Anyone make any heavy duty bilge blower hose?
 
Home Depot and Lowes sells an aluminum expandable dryer vent hose which is pretty trick. I'm using the 3" variety.

Boatfixr 01-15-2006 07:42 AM

Re: Anyone make any heavy duty bilge blower hose?
 
http://www.mcmaster.com/

Do a search for duct hose, or anything else that you can think of!

BillR 01-16-2006 12:22 PM

Re: Anyone make any heavy duty bilge blower hose?
 

Originally Posted by TRICK
I don't know but I need some too. The Maytag dryer hose on my Hustler is falling apart. There has to be something better.

here:
http://www.wynnenv.com/flexible_hose.htm

Reckless32 01-16-2006 01:20 PM

Re: Anyone make any heavy duty bilge blower hose?
 

Home Depot and Lowes sells an aluminum expandable dryer vent hose which is pretty trick. I'm using the 3" variety.
Exactly. Home Depot/Lowes aluminum flexible hose found in the venting/pipe section for gas appliances. I'd give that a try. Screw plastic or pvc unless the hose needs to be squeezed or crunched to fit. I use it for my home dryer with no problems.

BillR 01-16-2006 01:24 PM

Re: Anyone make any heavy duty bilge blower hose?
 

Originally Posted by RLW
Home Depot and Lowes sells an aluminum expandable dryer vent hose which is pretty trick. I'm using the 3" variety.

Yeah, I saw it too, but in salt air/water - won't it corrode?
Don't need to pull the motors again just to swap out vent hose.
I'll do it right the first time.


All times are GMT -5. The time now is 05:51 AM.


Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.