need a pair of 4 blades 16.5 X 30 or 31 pitch for #3a,5,6
 

anyone have a set of screws they want to sell reasonably? need a pair of 4 blade 16.5 X30 or 31 pitch for big shaft #3a,5,6 ssm drives. thx for any leads, ratman

Re: need a pair of 4 blades 16.5 X 30 or 31 pitch for #3a,5,6
 

anyone?

Re: need a pair of 4 blades 16.5 X 30 or 31 pitch for #3a,5,6
 

I have 30 4 blades labed either 16.5 or 17 diameter I will have to look. They are new and I tested them a few times on different boats when dialing them in.

Re: need a pair of 4 blades 16.5 X 30 or 31 pitch for #3a,5,6
 

I have a pair of 17 X 31 Labbed Merc 4 blades.

Re: need a pair of 4 blades 16.5 X 30 or 31 pitch for #3a,5,6
 

I have a 29 & 31 but the right rotation if there is any lefts out there. Remember you can have the dia changed easy and the pitch also up to 1.5"either direction. I use Bronson HIll

Re: need a pair of 4 blades 16.5 X 30 or 31 pitch for #3a,5,6
 

thx rocket, pm me with what you want for em, i'll see if anyone has the opposite rotation. now get yur azz back to work on that sweet alum boat your building, i want to see pics after its painted :D

Re: need a pair of 4 blades 16.5 X 30 or 31 pitch for #3a,5,6
 

how about these I think they are 17.5 x28 or 17 x 28 they are mint

Re: need a pair of 4 blades 16.5 X 30 or 31 pitch for #3a,5,6
 

call me at 678-522-4873 if interested

Re: need a pair of 4 blades 16.5 X 30 or 31 pitch for #3a,5,6
 

PEPPERS RACING HAS SEVERAL
MIKE
[email protected]