Teleflex - Sea Star Hydraulic Systems
Something happened to day that I couldn't believe it. I take my hat of to these guys :drink:
http://www.teleflexmarine.com/images/topbannerleft.jpg
Originally Posted by SEA STAR
From: Marc Adams [mailto:[email protected]]
Sent: 02 February 2006 18:44 To: Manos K Subject: Re: BLEEDING SEA STAR HYDRAULIC SYSTEM on its way. Thanks Marc Manos K wrote WOW thanks Marc My Address is MANY THANKS MUCH APPRECIATE IT!! Manos ________________________________________ From: Marc Adams [mailto:[email protected]] Sent: 02 February 2006 18:22 To: Manos K Subject: Re: BLEEDING SEA STAR HYDRAULIC SYSTEM I can send you one at no charge via mail. Let me know your address. Marc Manos K wrote: MANY Thanks Mark! No, unfortunately I do not have a filler tube. Can I get from the US or they sell it in the UK? Please let me know Many Thanks Manos ________________________________________ From: Marc Adams [mailto:[email protected]] Sent: 02 February 2006 17:57 To: Manos K Subject: Re: BLEEDING SEA STAR HYDRAULIC SYSTEM Manos: Nice boat. Please see attached bleeding instructions for this type of system. Do you have a filler tube? Thanks marc Manos K wrote: Hi MARC, And thanks for the message. I am not a dealer but this is for my own boat (you can see it here http://www.gatodimare.forumhut.com ) I have a Yamaha 200VMax outboard engine and a hydraulic sea star system on it. Any info on how to bleed it without spending a fortune much appreciated. Many Thanks again. Cheers Manos ________________________________________ From: Marc Adams [mailto:[email protected]] Sent: 02 February 2006 15:52 To: Manos K Subject: Re: BLEEDING STAR HYDRAULIC SYSTEM Manos: If you are a dealer that does a lot of these jobs then the Power Purge Jr. would be for you, however if this is just your own boat, I think that this unit would be quite expensive. Please let me know what type of system you have, ie. Outboard, Inboard, Stern Drive....etc....I can email you the bleeding details once I have this information. thanks Marc Manos K wrote: Dear Sir/Madam, I would like to know how I can bleed the SEA STAR hydraulic system that I just installed on my boat. Some friends told m that there is a special tool that does this job however, they do not know neither the type or the name of this device. I would be most grateful if you can advise me what is the name, price and the stockists of this tool kit in the US and Europe. Mane Thanks & Kind Regards Manos |
All times are GMT -5. The time now is 01:38 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.