My HP 500 EFI Whipple motor made 903 ft/TQ and 839 HP

[Outdrive1]

You'd break a hundred if you unloaded all the porn out of the cabin.....

[Strip Poker 388]

Here is a pick of the Bravo Shop's new B Max foot

[Strip Poker 388]

Originally Posted by BADKACHINA

You'd break a hundred if you unloaded all the porn out of the cabin.....

Spy cam

[LubeJobs42]

Hi Rob, Nice numbers!! That's incredible! I should have done that to my old 500's years ago. What did you do to the motors beside whipples and ECU upgrade?
I have 2 of motors (For sale-CHEAP). They are 500 efi's with Vortec superchargers, arizona speed throttle bodies and aluminum heads. I was told they were over 750 HP each but I had a hard time believing it. I just had the motors gone through as well as the superchargers. Anybody interested? I was told the motors had an additional $40K put in to them.

[Strip Poker 388]

This is my little Whipple Motor on the dyno at Precision Marine .Mark dyno's the motors just like they would be run in the boat All the accessory's and the CMI headers. I even had fluid in the power steering reservoir looping it thru the pump. This is real world dyno numbers. A lot of shops will dyno them with out all the marine stuff on Inflating there horsepower numbers .The best thing was I went straight from the dyno to my boat ,ready to bolt in and it ran all summer

I am going back in March and Dyno them again and see if I made some more power this time around . I will save all the dyno sheets this time

Ck out the screen shot on the computer of the HP/TQ curves .

[Strip Poker 388]

Originally Posted by LubeJobs42

Hi Rob, Nice numbers!! That's incredible! I should have done that to my old 500's years ago. What did you do to the motors beside whipples and ECU upgrade?
I have 2 of motors (For sale-CHEAP). They are 500 efi's with Vortec superchargers, arizona speed throttle bodies and aluminum heads. I was told they were over 750 HP each but I had a hard time believing it. I just had the motors gone through as well as the superchargers. Anybody interested? I was told the motors had an additional $40K put in to them.

Thanks

Whats up Gino You ready for Emerald beach poker run again.Heres the thread on my build up. Its tell ya every thing I did in detail..Good luck selling the motors ...

http://www.offshoreonly.com/forums/s...500efi+hustler

[Semper Fi]

Nice #'s. That's impressive

[Strip Poker 388]

ready to go in

[LubeJobs42]

Originally Posted by Strip Poker 388

Thanks

Whats up Gino You ready for Emerald beach poker run again.Heres the thread on my build up. Its tell ya every thing I did in detail..Good luck selling the motors ...

http://www.offshoreonly.com/forums/s...500efi+hustler

Rob, I'll be at Emerald beach but you need to get down here for the Miami run to The keys Feb 23. I spoke to Stu tonight and they have the best turn out ever. Unfortunatly I'm not going to be in the Motion, They haven't even started the repair work from the incident on the last run.

[Strip Poker 388]

mo