Re: -2 imco lowers
Originally Posted by Ran-Dom 32
:mad: those are complete drives (only thing I found)
|
imco -2
Originally Posted by Wardey
(Post 1653868)
I have (1). Used about 10 min. by Grant at Grant's Custom Rigging ( http://www.grantscustomrigging.com/ ) Perfect shape. Let me know, Dave
|
Originally Posted by kpot
(Post 2877020)
do u still have it ken 727-797-7712
|
shorts on a magnitude
Originally Posted by blaniac
(Post 1654439)
I got mine from the same place that Harper220 did, and they are going on this weekend and hopefully tested out next week. I also pre-bought some 1" spacers just in case I need to back down a little. I think I will probably be happy and keeping them.
|
Make sure the shorties have the upper cav plate extension on them if they are used as imcos do not have lower cav plates. Also make sure they are stainless. The aluminum one I made cracked off and I also lost the shower pickup with it. BTW the stainless one from imco is $130 shipped.
I talked to a guy with a 35 fountain that could not get on plane without the upper cav plate extensions. He said the really help preventing airiation of the prop. |
what does the cavitation extension plate help with.
|
It gives you a location to mount the drive shower pickup. Also helps you plane off by keeping air from sucking into the prop (blowing out) and acts as extra planing surface until the bow noses over.
The extension plate makes the cav plate on the upper about the same size as the merc lower that was removed. |
All times are GMT -5. The time now is 05:41 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.