kevlar scarab???
03-09-2006, 07:30 AM
#2
VIP Member
Re: kevlar scarab???
this is the age old question 
unfortunately i don't think there is anything definitive as far as hull ID goes. about the only way is through inspection. kevlar has a goldish appearance but unfortunately most old resins do as well. it also does not grind well it will tend to kinda fuzz up as you grind on it (that is probably the best test). what year/model is the boat?
unfortunately i don't think there is anything definitive as far as hull ID goes. about the only way is through inspection. kevlar has a goldish appearance but unfortunately most old resins do as well. it also does not grind well it will tend to kinda fuzz up as you grind on it (that is probably the best test). what year/model is the boat?
__________________
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )
Last edited by glassdave; 03-09-2006 at 07:32 AM.
Platinum Member
03-09-2006, 02:37 PM
#7
Registered
Thread Starter
Re: kevlar scarab???
Originally Posted by METAL BROS RACING
Shoot it from 30 feet away with your 40 cal, if it goes through it, well it's not kevlar 
03-09-2006, 08:42 PM
#10
Registered
Thread Starter
Re: kevlar scarab???
Originally Posted by jhiguy377
weigh it, kevlar 30' should be 400# lighter than stock ( I think a stock 30' 454, TRS should be about 6700#) kevlar about 6300#
