Offshoreonly.com - corrosion protection for boat lift

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)

- - corrosion protection for boat lift (https://www.offshoreonly.com/forums/general-boating-discussion/126521-corrosion-protection-boat-lift.html)

CN24	04-03-2006 08:50 AM

corrosion protection for boat lift

Is corrosion protection for a galvanized boat lift needed in salt water. If so what would be used as an anode, zinc, aluminum, magnesium?

Pantera1

04-03-2006 08:56 AM

Re: corrosion protection for boat lift

Hot dip galv. is as good a finish as you can get for corosion resistance.. You could use a mil spec epoxy paint like tnemec (sp)

Anodi

06-02-2010 10:38 AM

In Salt Water, Zinc would be the answer

All times are GMT -5. The time now is 10:35 AM.