Re: Static Electricity.
Originally Posted by Iggy
InXS, how do you electrically ground the tank/hose prior to pumping fuel into the boat?
|
Re: Static Electricity.
O.K.
Preasurizing the tank the way I stated above is a bad idea - I'll stop being so lazy and dumb. Is there anyway to pump gas from a gas caddy other than using old fashioned gravity. Maybe a hand pump that doesn't pressurize the tank? Thanks Bryan |
Re: Static Electricity.
Originally Posted by yss
O.K.
Preasurizing the tank the way I stated above is a bad idea - I'll stop being so lazy and dumb. Is there anyway to pump gas from a gas caddy other than using old fashioned gravity. Maybe a hand pump that doesn't pressurize the tank? Thanks Bryan |
Re: Static Electricity.
Originally Posted by InXS
Overtons. Item #34422, $119.99
Thanks. |
Re: Static Electricity.
InXS, Your only half way there in grounding the tank to the truck. The tires on the truck/trailer will isolate it from the earth. The tires will generate static as it drives down the road. You need to ground the truck/trailer to an electrical earth ground before discharging fuel.
I used to work a general aviation airport pumping fuel. We grounded the fuel truck first to an earth ground, then attached a ground wire from the truck to the aircraft. The fuel hoses had ground wires built in too like yours. |
All times are GMT -5. The time now is 03:25 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.