My Compliments to Keith Eickert!
:drink: :drink:
Yesterday I drove up to Keith Eickerts to pick up my engines for the MTI. I had never met Keith in person before. What an incredible guy! First of all, I have never in my life seen such an immaculte shop! It's probably 15,000 sq feet and there is not a total of 1 ounce of oil on the entire floor. It is as clean as a hospital. I have never seen anything like it. He was showing me some of the new things he's working on and the guy is so far ahead of anyone else i have seen in the indusrty. I decided yesterday after talking with him to have him build me a set of the big Turbo engines. He is esimating 1,350 on pump gas with low boost with dependability. 1,500+ on C12. I only hope the MTI is big enough!! |
Re: My Compliments to Keith Eickert!
Yeah Gino,
Keith is a great guy, down to earth and yes, his engine assembly room rivals some of NASA's clean rooms for cleanliness! :D Are you using his headers? Dean |
Re: My Compliments to Keith Eickert!
He has our vote!!!
|
Re: My Compliments to Keith Eickert!
The engines he is going to build for me are beautiful. Very different looking from the normal blower motor. He said the 1350's can run on pump gas and still be very dependable.
|
Re: My Compliments to Keith Eickert!
Originally Posted by LubeJobs42
The engines he is going to build for me are beautiful. Very different looking from the normal blower motor. He said the 1350's can run on pump gas and still be very dependable.
|
Re: My Compliments to Keith Eickert!
I think that I have possibly seen a set of those motors :drink:
|
Re: My Compliments to Keith Eickert!
Originally Posted by JCPERF
I dare you to put a cigarette butt out on his floor.Instant death :D
|
Re: My Compliments to Keith Eickert!
Is this the motors you had the complete top end freshen up ????
http://www.offshoreonly.com/forums/s...ight=valve+job . |
Re: My Compliments to Keith Eickert!
Originally Posted by Strip Poker 388
Is this the motors you had the complete top end freshen up ????
http://www.offshoreonly.com/forums/s...ight=valve+job . |
Re: My Compliments to Keith Eickert!
Originally Posted by LubeJobs42
Hi Rob, No, different motors entirely.
Did Keith dyno them for you??? |
All times are GMT -5. The time now is 06:20 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.