Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)
-   -   How Can I Get A McGard Prop Lock OFF ???? (https://www.offshoreonly.com/forums/general-boating-discussion/129175-how-can-i-get-mcgard-prop-lock-off.html)

Strip Poker 388 05-03-2006 04:48 PM

How Can I Get A McGard Prop Lock OFF ????
 
1 Attachment(s)
I am SOL .I was trying to take the prop off and the teeth on the lock itself broke off :mad: The key is fine.Is there a trick besides a torch,air chisel or cut off wheel to get them off ?

With out damaging the threads of the shaft :eek:

Thanks for any suggestions.

Rob

Dean Ferry 05-03-2006 04:53 PM

Re: How Can I Get A McGard Prop Lock OFF
 
Rob,
I would say that the cut-off wheel is probobly the way I would go, you can cut it ~50% on 2 sides and then try to GENTLY pry to 2 pieces of the nut off the prop shaft! Man, that really sucks, it gives new meaning to THEFT -PROOF! :mad:
Good luck,
Dean

Boomer 880 05-03-2006 05:00 PM

Re: How Can I Get A McGard Prop Lock OFF
 
Tap a large socket over the lock, and turn off. It might trash a socket, but it should grip enough to remove.

Strip Poker 388 05-03-2006 05:08 PM

Re: How Can I Get A McGard Prop Lock OFF
 
1 Attachment(s)
Thanks Dean..


What about the Stainless ring/collar that surrounds the lock nut ?? I believe the nut is brass??? I was thinking the air cut off wheel would be to big to get in there??


Thanks

Rob

JnT 05-03-2006 05:18 PM

Re: How Can I Get A McGard Prop Lock OFF
 
Try a Dremel tool and cut it off.

WARPARTY36 05-03-2006 05:58 PM

Re: How Can I Get A McGard Prop Lock OFF ????
 
Paint the prop gold, and set it on the street corner. I am sure there are some fine young men in Jackson to remove it for you :evilb:

Sorry for your misfortune Rob :( Are you going to PicWick?

Magic Medicine 05-03-2006 06:19 PM

Re: How Can I Get A McGard Prop Lock OFF ????
 
I used a dremel to cut off mine when I lost the key. Like Dean said, cut it down each side and pry it off.

fountain1fan 05-03-2006 06:29 PM

Re: How Can I Get A McGard Prop Lock OFF ????
 
plazma cutter :drink:

MitchStellin 05-03-2006 06:42 PM

Re: How Can I Get A McGard Prop Lock OFF ????
 
Can't ya get one of your chicks to suck it off :eek: :D The brass nut is soft, I would try the socket over it first, it sounds much easier than the cut off wheel. Does it have a nylon insert, like a lock nut? If so you could melt that out and it might turn easier. The best way is to drop the lower, remove the prop shaft and replace the prop and the shaft and be done with it. :D

open87 05-03-2006 06:57 PM

Re: How Can I Get A McGard Prop Lock OFF ????
 
isn't today your day off


All times are GMT -5. The time now is 09:38 PM.


Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.