Diamond Plating (cleaning)
 

Anybody now to get that shine back on the Dia.plate.It`s starting to look dull and ugly. :mad:

Flitz. Available in Tampa at Buzz-Off Alarms and Audio. Located at 7212 N. Dale Mabry (1/2 mile South of Waters) We also have a polishing ball that attaches to your drill.

flitz...I discovered that stuff at the new york boat show...love it...and it works on the jewlery too :D

where can I order some

Flitz or Met-All are both good products- for badly tarnished or dull aluminum that is churning up a lot of black residue as you polish, use flour to remove it. That will speed up the process a lot! :D

Jane- any marine supply will have it...even the local auto parts store had it here...

If you want it polished to perfection than try the above. Propblem is keeping that perfect finish can be a *****. If you want it shiny try some fine steel wool and WD40.

Mothers aluminum polish works very well, it just takes alot of elbow grease.

Feel free to email or call (813)882-8477 I can send it out anywhere in the US.

Andy Buzz