im back in the water again.
#1
Registered
Thread Starter
Join Date: Nov 2004
Location: prairieville,la
Posts: 457
Likes: 0
Received 0 Likes
on
0 Posts
im back in the water again.
here some pics of my project i went efi and drysump with my 578's ran it for a little bit wed afternoon saw 50mph at 3500 rpms tabs still half way down and didnt even start to trim .. let ya know how it does for its first voyage this weekend.
#5
VIP Member
VIP Member
Re: im back in the water again.
heat, aluminum and stainless grow at a diff rate, may spring a leak, stainless will expand aluminum wont.
#10
Registered
Thread Starter
Join Date: Nov 2004
Location: prairieville,la
Posts: 457
Likes: 0
Received 0 Likes
on
0 Posts
Re: im back in the water again.
Not Yet Not Since The Efi And Drysump I Was At 680 With Dean Nickerson Carbs Last Time When They Put There Carberator On There It Did 715 So Who Knows What Drysump And Efi Does.. Truely.. But Im Having Some Problems With One Motor If I Cant Figure It Out Tomarrow Morning Then I Am Bringing It To Mark At Precision Talked To Him This Morning Seems Like A Real Nice Guy I Really Hope I Can Get Things Worked Out For This Weekend Ive Missed Two Pokerruns Already Dont Want To Miss Another.