Can you run a Merc propeller on an OMC King Cobra?
#1
Can you run a Merc propeller on an OMC King Cobra?
A friend of mine needs a new prop for his Liberator and the OMCs are tough to find used. I put his prop on my Bravo drive and the splines seem to be the same but the depth was different. Is there any kind of "kit" with thrust washer, spacers, etc (besides a flo-torq) that would allow him to run a Merc prop? I think his boat would run well with a Mirage and there a lot more out there used.
Thanks
Thanks
#2
Registered
Re: Can you run a Merc propeller on an OMC King Cobra?
Contact your local Merc/Quicksilver dealer....the prop application catalogue should have appropriate spacer references for different brand applications.
#3
Re: Can you run a Merc propeller on an OMC King Cobra?
Originally Posted by hpoffshore
Contact your local Merc/Quicksilver dealer....the prop application catalogue should have appropriate spacer references for different brand applications.
#4
Registered
Re: Can you run a Merc propeller on an OMC King Cobra?
Originally Posted by noboat
Oh man, the employees at my local merc dealer are about as sharp as a marble!
#9
Re: Can you run a Merc propeller on an OMC King Cobra?
Originally Posted by BY U BOY
Try Ebay
#10
coolrunning racing
VIP Member
Re: Can you run a Merc propeller on an OMC King Cobra?
you use the omc flow torque hub kit in the merc props you would like so they will work on the omc. i do it all the time.