Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)
-   -   Forklifts (https://www.offshoreonly.com/forums/general-boating-discussion/134188-forklifts.html)

pachangalpina 07-02-2006 02:53 PM

Re: Forklifts
 

Originally Posted by JPD Motorsports
My friend uses it to stab gooseneck and bumper pull horse trailers in his repair shop all day long just dont be "speedy" and not lock the ball down on it. .

Please explain why you would not lock the ball.

GOODT 07-02-2006 03:05 PM

Re: Forklifts
 

Originally Posted by pachangalpina
Please explain why you would not lock the ball.


I think was trying to say DONT take short cuts (speedy) and leave the coupler unlocked.............

pachangalpina 07-02-2006 03:14 PM

Re: Forklifts
 
AHH!!! I miss read it. ( read as dont be speedy and in addition dont lock the ball.) :D

I saw one of my guys have a trailer crest the incline into the shop and see a coupler lift off the ball and stare him in the face. Said he felt that there was enough tongue wt that all he sould have needed was the 1-7/8 ball even though it was a 2-5/16 coupler. He never tried that again.

GOODT 07-02-2006 03:19 PM

Re: Forklifts
 
I too had to reread it ....

Tony Montana 07-02-2006 03:34 PM

Re: Forklifts
 

Originally Posted by LostinBoston
Anyone have a forklift that they use to move their boat around while on the trailer. I know dealerships and manufactureres use them. We keep the NT in a wharehouse with a 11'-6" door and it gets a little tight and needs 1-2 spotters when backing it in with the truck. With a forklift it seems it wioll be much easier and possible to do it with 1 person. Where could I find one in the Ft. Lauderdale area? how much do they usually cost? it has a tounge weight of about 1500# so would a 2000# lift be enough to lift it and move it?
thanks
-Rick

May think about one of these instead :cool:


http://www.powercaster.com/products.html

mr_velocity 07-02-2006 03:49 PM

Re: Forklifts
 
With the shutdown of Ft Monmouth they're auctioning off all kinds of good stuff including fork lifts also a whole bunch of 13' Boston Whalers.

TSPM 07-02-2006 03:55 PM

Re: Forklifts
 

Originally Posted by Tony Montana
May think about one of these instead :cool:


http://www.powercaster.com/products.html

Those power casters are not good for short tight turns when moving long trailers. They tip easily. Also the tractor idea might be ok if there is enough rear counterweight. Again the tractor has no way near the turning radius of the rear whhels on the for lift. You can just about spin them in place and very stable in tight spots.

TSPM 07-02-2006 03:56 PM

Re: Forklifts
 

Originally Posted by mr_velocity
With the shutdown of Ft Monmouth they're auctioning off all kinds of good stuff including fork lifts also a whole bunch of 13' Boston Whalers.

Do you have a number for the auctions or a contact there?

el indio 07-02-2006 06:37 PM

Re: Forklifts
 
Put a hitch on the front of your truck...............

mr_velocity 07-02-2006 08:19 PM

Re: Forklifts
 

Originally Posted by TSPM
Do you have a number for the auctions or a contact there?

Nope, I can ask. My neighbor was telling me about it yesterday.


All times are GMT -5. The time now is 03:13 PM.


Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.