what to cover pvc guides on boat lift with ?
#1
VIP Member
VIP Member
Thread Starter
Join Date: Jan 2006
Location: nj
Posts: 97
Likes: 0
Received 0 Likes
on
0 Posts
what to cover pvc guides on boat lift with ?
looking to wrap my four , 2 inch pvc guide posts on my boat lift so they do not scratch any of the paint PLEASE ... any sugestions ????
#3
Registered
Join Date: Nov 2003
Location: Lanoka Harbor, NJ
Posts: 3,354
Likes: 0
Received 0 Likes
on
0 Posts
Re: what to cover pvc guides on boat lift with ?
Hey Cig275 - I've seen it done in carpet and foam. Mine has neither and I need to do as well Post pics when yours is completed
Where you located in the great state of NJ??? I'm down at Exit 74
Chris
Where you located in the great state of NJ??? I'm down at Exit 74
Chris
#4
Platinum Member
Platinum Member
Join Date: Jun 2005
Location: Tulsa, Oklahoma / GLOC
Posts: 3,376
Received 0 Likes
on
0 Posts
Re: what to cover pvc guides on boat lift with ?
Mine are wrapped in carpet. Not the best looking but it works well.
Last edited by Sea-Dated; 07-07-2006 at 02:01 PM.
#5
Re: what to cover pvc guides on boat lift with ?
What you need is to have REALLY long pieces of PVC that go all the way up over your rub rail even when the lift is all the way down at its drive on lowest. That way your rubrail always keeps you centered on the lift.
#6
Registered
Join Date: Nov 2003
Location: Lanoka Harbor, NJ
Posts: 3,354
Likes: 0
Received 0 Likes
on
0 Posts
Re: what to cover pvc guides on boat lift with ?
Originally Posted by Sydwayz
What you need is to have REALLY long pieces of PVC that go all the way up over your rub rail even when the lift is all the way down at its drive on lowest. That way your rubrail always keeps you centered on the lift.
I would still like to cover mine even when they go up past the rub rail ... and I don't even own a Gladiator or 45 Max
#8
Charter Mod
Charter Member
Re: what to cover pvc guides on boat lift with ?
I used pvc pipe insulation (black foam). It fits perfectly to the size of pvc you have and does a good job of protecting the boat. I taped mine after putting them on with electrical tape.
Thread
Thread Starter
Forum
Replies
Last Post
handfulz28
Trucks, Trailers and Transportation
2
05-24-2007 02:02 PM
Jayl13
General Boating Discussion
42
02-07-2003 07:15 AM