what to cover pvc guides on boat lift with ?
looking to wrap my four , 2 inch pvc guide posts on my boat lift so they do not scratch any of the paint PLEASE ... any sugestions ????
|
Re: what to cover pvc guides on boat lift with ?
Those foam floaty things.
I need to do the same thing. |
Re: what to cover pvc guides on boat lift with ?
Hey Cig275 - I've seen it done in carpet and foam. Mine has neither and I need to do as well :D :D Post pics when yours is completed :drink:
Where you located in the great state of NJ??? :cool: I'm down at Exit 74 :evilb: Chris |
Re: what to cover pvc guides on boat lift with ?
1 Attachment(s)
Mine are wrapped in carpet. Not the best looking but it works well.
|
Re: what to cover pvc guides on boat lift with ?
What you need is to have REALLY long pieces of PVC that go all the way up over your rub rail even when the lift is all the way down at its drive on lowest. That way your rubrail always keeps you centered on the lift.
|
Re: what to cover pvc guides on boat lift with ?
Originally Posted by Sydwayz
What you need is to have REALLY long pieces of PVC that go all the way up over your rub rail even when the lift is all the way down at its drive on lowest. That way your rubrail always keeps you centered on the lift.
I would still like to cover mine even when they go up past the rub rail ... and I don't even own a Gladiator or 45 Max ;) :D :eek: :evilb: |
Re: what to cover pvc guides on boat lift with ?
2 Attachment(s)
My guide polls spin when they hit the rubrail, no need for any carpeting etc.
|
Re: what to cover pvc guides on boat lift with ?
I used pvc pipe insulation (black foam). It fits perfectly to the size of pvc you have and does a good job of protecting the boat. I taped mine after putting them on with electrical tape.
|
Re: what to cover pvc guides on boat lift with ?
Doesn't JC use duct tape :evilb:
|
All times are GMT -5. The time now is 02:40 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.