What is the going rate for a 2005 525 EFI with XR drive with about 85 hours on them?

DRIVEN1 · 07-20-2006, 09:11 AM

What do you think I could sell these for? I woud have 3 of them to sell if I decided to do this. It would include the headers and everything else needed to run them. Thanks

FeverMike · 07-20-2006, 10:15 AM

Uh Oh, what are you up to?

kr1276 · 07-20-2006, 10:19 AM

I might be interested in all three. Let me know what you want for them

Keith

ktron · 07-20-2006, 10:57 AM

Are you selling the Transom assembly too? If so, what kind?

Downtown42 · 07-20-2006, 01:16 PM

25-28k engine and drive x 3 ....?

dirtlawyer · 07-20-2006, 01:31 PM

Quote:

Originally Posted by kr1276

I might be interested in all three. Let me know what you want for them

Keith

that's the last thing you need Keith... LOL

Actually your ride would be a real sleeper with trip 525's... I say you buy them! Your 496's ought to be easy to get rid of...

kr1276 · 07-20-2006, 04:29 PM

Bryan,

I was originally thinking about the 525's or Ilmor's and could not find three used. I found some 500's but now that I am on my second set of fresh water cooled, I would never go back to raw water. The first two exhaust manifold failures I have seen were in the 800 hour range which is great!New was not in the budget so I decided to order the CMI's first. They have not been installed. Still waiting on some pipes from CMI. Anyway this caught my attention, trips in my own back yard and reasonably low hours. It seemed to make some sense (depending on the price) and yes the 496's should be easy to move. It probably would shock a few at the OPBA poker runs!

Keith

dirtlawyer · 07-20-2006, 04:42 PM

496's with CMI's would be really easy to move... good luck - sounds like a viable option.

I've been looking for a pair of 300X's for my boat - would love to break into the triple digits...

As for being a sleeper - I would keep it quiet if you do buy them and then make the debut at the Long Labor Day Run... Heck you might even be able to run me down if I still have the current motors...

DRIVEN1 · 07-20-2006, 05:21 PM

Quote:

Originally Posted by FeverMike

Uh Oh, what are you up to?

What do you mean.

Lets just say I would still want to be the fastest boat in the development after that Skater moves in.

DRIVEN1 · 07-20-2006, 05:24 PM

Quote:

Originally Posted by ktron

Are you selling the Transom assembly too? If so, what kind?

Yes it would be everything, probably even most of the monster gauges that would support those motors. I do not have the ITS transom assembly.